Due To Entering an Invalid  IP Address :Can’t connect to 192.168.10.1

• Entering an IP address manually into the web browser’s location bar can be challenging, as any variation or unintended character may redirect you to a different page.
• To avoid this issue, a simple solution is to copy and paste the correct IP address into the browser’s location bar.
• This ensures accuracy and eliminates the risk of landing on an unintended webpage.
• Double-check to confirm that the pasted IP address is accurate before proceeding.

Because The Ethernet Cable Was Lost

Before attempting to access the 192.168.10.1 admin panel on many routers, a physical connection is often necessary. If you are experiencing issues such as “Can’t connect to 192.168.10.1,” the most common method to establish this connection is through Ethernet wires. 

Attaching your computer to the router in this way is a straightforward and quick process, taking only a few seconds. This physical connection is crucial for troubleshooting and configuring router settings through the admin panel.

Can’t connect to 192.168.10.1 because of a malfunctioning router.

If, despite attempting the aforementioned suggestions, you still encounter issue like Can’t connect to 192.168.10.1, there’s a chance that your router might be malfunctioning. Any missing components or issues with the intricate device could lead to complications. For a resolution to this matter, please reach out to us for further assistance.

What Does An 192.168.10.1 IP Address Do?

The IP address serves as a means through which you can effortlessly initiate the setup process for the Wavlink router and configure various network devices. These devices may encompass webcams, VOIP telephones, and DVRs.

What Is The Use Of 192.168.10.1 IP Address?

There are more than 26 billion gadgets linked to the internet today. Hence, from 26 billion only 4 billion IP addresses are accessible. It is not that those devices linked to the internet do not have their own IP address.

Furthermore, there is no other way to identify the devices on a network except by their IP address. The internet assigned the number authority in order to determine IP exhaustion. However, an overseeing American non-profit provided a universal remedy in the form of a private IP address. Everybody has an IP address, and your host router uses the private IP address.

What Is Private IP Address 192.168.10.1?

The key differentiator between private and public IP addresses lies in access limitations. A public IP address operates without stringent protocols, while a private IP address may present more challenges.

By implementing the three tips mentioned above, we anticipate that your difficulty in connecting to 192.168.10.1 has been resolved. If the issue persists, you also have the option to log in to the Wavlink router using a web address.

How To Login Into Wavlink Router Via Web Address

To initiate the login process for the Wavlink router, follow these steps:

• Begin by connecting your computer to the router using an ethernet cable.
• Alternatively, establish a wireless connection by selecting the router’s SSID and entering the password found on the router’s tag.
• Open Google Chrome on your computer or laptop and type wifi.wavlink.com in the URL bar.
• Choose your preferred language, then input “admin” for both the username and password.
• Finally, click on “login.”
• By completing these three steps, you will successfully log in to the Wavlink router.

How To Configure Router Or Extender?

To begin setting up the Wavlink router, follow these steps:

• Connect the router’s WAN port to the internet.
• Plug the power adapter of the Wavlink router into an electrical socket.
• Turn on your WiFi and locate the SSID name.
• Allow a few minutes for the installation process to commence.
• For this method, ensure you have a long ethernet cable.
• Open Google Chrome on the device connected to WiFi.
• Type wifi.wavlink.com in the address bar.
• Enter the username and security passcode in the provided fields.
• Follow the on-screen instructions step by step to complete the configuration process.
• By following these steps, you will successfully set up and configure your Wavlink router.

Configure Wavlink Extender By WPS Method

To initiate the connection between your Wavlink extender and host router, follow these steps:

• Begin by plugging the power adapter of the Wavlink extender into a power socket.
• Ensure the Wavlink extender is positioned in close proximity to the host router.
• Press the WPS button on the router.
• Within two minutes, press the WPS button on the Wavlink extender.
• Wait for a few minutes until a solid blue LED appears on both devices.
• Consequently, the extender and router are now successfully linked with each other.
• By following these steps, you establish a successful connection between your Wavlink extender and the host router.

Configure Wavlink Extender By Manually

The steps below will help you set up your Wavlink extender:

• Position your extender near the modem or router.
• Wait for a solid light to appear on the extender device.
• Connect any WiFi-enabled device, such as a laptop, computer, or mobile phone.
• Connect your WiFi to Wavlink_EXT network.
• Open your browser and enter the web address of the Wavlink device, wifi.wavlink.com, in the search bar.
• Enter the credentials to access the login page.
• The new Wavlink extender setup page will then appear on your display.
• Follow all the on-screen instructions to connect your Wavlink extender to the router.

By following these steps, you can successfully set up and connect your Wavlink extender to enhance your network coverage.

Some Troubleshooting Tips to Fix Errors: Can’t connect to 192.168.10.1

• Check the distance between the router and the extender.
• Take note of where the extender is positioned.
• Update the Wavlink Extender program.
• Check every connected wire.

If the extender problem persists after attempting these fixes, factory reset the Wavlink WiFi extender.

Read More

• Wl WN566a2 AC750 Extender Setup
• Wl WN566a2 AC750 Extender Setup
• WL WN579G3 AC1200 Extender Setup
• WL WN583A6 AC2100 Extender Setup
• Wavlink wifi4 extender setup
• WL WN575A4 AC1200 Extender Setup
• WL WN575A4 AC1200 Extender Setup
• WL WN583AX1 AX1800 Extender Setup

Features Of Wavlink WiFi 6 Router Setup 

Mainly, this series contains three router models such as WN530G3 AC1200, WN531AX2 AX1800, and WN531MX3 AX3000. The basic technical features of Wavlink WiFi 6 Router Setup are listed below.

• The IEEE 802.11 ax-ac-a-n-g-b standards are met by these routers.
• The frequency band AX standards operate more quickly than the AC standards.
• which offers up to 2400Mbps of the fastest internet speed.
• These devices’ MU-MIMO technology makes it possible for multiple devices to receive signals at once.
• These routers also support static IP, dynamic IP, and PPPoE internet access.
• Users can connect the device using the touch link connecting process without entering the router’s login credentials or other information.
• Additionally, network management is easily accessible with the cloud app setup method.
• The antennas of the WN530G3 router setup are easily foldable and detachable.
• These antennas increase the router’s capacity to deliver and receive signals with greater sensitivity.
• To convert wired connections to a wireless network, this router also supports the AP mode.
• The routers’ USB ports facilitate easy file sharing and transferring.
• Lastly, the connected devices will always receive uninterrupted signals through the router’s Ethernet ports.

Wavlink WiFi 6 Router Setup via WPS

Interestingly, the WL WN530G3 AC1200 router setup supports the WPS configuration button that can be installed with some simple steps.

• Unpack the router and insert it into an electrical outlet to use this method.
• Verify the WPS functionality of the current modem and plug in this device as well.
• Next, press the WPS button located on the router’s front panel.
• Check the router’s WPS light, which will alert you to the procedure.
• Additionally, press the WPS button on the host modem to establish a connection.
• Both LEDs will then begin to display the best signs in solid colors as a result.
• which indicates that the router has been successfully configured and connected.
• Lastly, decide whether to connect your device to it wirelessly or via wire.

After that, to improve internet coverage at the location of the WiFi dead spot, unplug the router and move it there. Make sure that this device remains in the modem’s signal range.

Wavlink WiFi 6 Router Setup through smart App

In addition, Wavlink’s cloud smart app offers an additional way to quickly configure the router. To complete the process, turn on your device and download this application.

• After plugging in, connect your device to the router’s network.
• After that, open the Google Play Store on your Android smartphone.
• Search the Play Store for the official Wavlink cloud app, then pick it.
• Hold off on opening the application until the installation is complete.
• Choose the language and fill in the designated login field with your credentials.
• As soon as you log in, begin configuring your router.
• You can then create a new SSID network and set the password.
• Alternatively, pick the network that is currently in use from the list and input the password.

WL WN531MX3 AX3000 Touch Link Method

To configure this router, choose the Cloud App method and use its touch link feature to connect your devices to it.

• Install the Wavlink app on the networked device before proceeding.
• Afterwards, follow the instructions on the app to finish the configuration process.
• Next, use the other device to tap the touch link panel of the router with its head.
• Permit the device to connect to the router’s network and perform a scan.
• The password will not need to be manually entered in the field.
• You can successfully connect the guest device to the network in this manner without requiring the router’s credentials.

Troubleshooting Tips For WiFi 6 Router Setup Errors

Unfortunately, there might be a probability that the Wavlink WiFi 6 Router Setup starts working faulty. There could be any reason behind this situation, from the router or modem’s end. Apply these solving tips for Wavlink WiFi 6 Router Setup to get the issues removed.

Adjust the Router’s Location

It’s possible that the router isn’t receiving enough signals because it’s too far from the modem. Alternatively, the signals are being absorbed by metallic and electrical objects that are in contact with the router. Therefore, to obtain strong signals, move the router and position it close to the modem. The router will soon begin to send out stronger signals.

Revision The Software of the Router

Make sure the router’s software is up to date in order to maximize its performance. Check the firmware version that the router is currently running on in order to accomplish this. If it’s out of date, download the latest version and go to the router’s web portal. There, select the Update Firmware option, and follow the instructions 

Remember These Points while Wavlink WiFi 6 Router Setup

Take into account a few things when utilizing the router network to make the most of it. To determine whether the router is operational, regularly check the light indicators. Use the new ethernet wire to establish a wired connection rather than a wireless one. Establish a distinct network name for your SSID and use the app to access the guest control.

Common Wavlink Setup

• ALC AMR300N WiFi Repeater setup.
• Pixlink wifi repeater setup 
• kervi wifi extender setup 
• Fortrehui WiFi Extender setup.
• Joowin WiFi Extender Setup
• LAOSGE wifi extender setup 

Some Issues You Might Face while Wavlink WiFi 6 Router Setup

• Login issues with Wavlink
• Wavlink.com’s WiFi is down.
• Why won’t my wifi extender work
• WiFi extender password not working Ethernet extender not working
• Not functioning Wavlink router
• Wavlink Red Light Issue
• Wavlink Yellow Light Issue.

If you are facing any issues then please contact us, and we will be happy to help you.

Also read: Netgear Orbi 970 (RBE973S) Setup

The MSRM WiFi extender setup instructions are easy and straightforward. Before purchasing the MSRM WiFi extender equipment, confirm the presence of dead zones in your home or workplace, depending on where you wish to install the device. Before you can determine dead zones in a specific place, you must first ensure that your existing WiFi router has a consistent and active internet connection. If you choose a dead spot with no signal, there is no need to install the MSRM WiFi extender because there is no signal.

For MSRM wifi extender setup , follow the steps outlined below:

• First, use the provided connector to connect your MSRM WiFi range extender to an electrical outlet.
• Now, navigate to the WiFi selection screen using your wireless device, such as a laptop, mobile phone, tablet, or other similar device. From the drop-down menu, select the MSRM option.
• Launch your preferred web browser and begin browsing the internet. To begin, enter the IP address 192.168.10.1 into the URL bar of your web browser.
• You will now be sent to the MSRM extender’s management page.
• Fill in the login information in the appropriate fields. To finish the setup, enter the username admin and password admin.
• Sign in to your account by clicking the login button.
• Choose the Repeater mode from the menu. Choose the current SSID or network name of your existing wireless network from the WiFi router where you want to add extra users.
• Enter the credentials for your existing wireless network in the repeater SSID box. Simply input a different name in the area provided below to create a new network name.
• Make sure the password you select is the same as the one used by your current router.
• Click the connect button to save the information you’ve entered. Connect to the newly enlarged wireless network after that.
• Your MSRM WiFi extender is now fully working. Move your extender to a new place or a dead zone where you want to use your internet connection.

MSRM extender setup by WPS push button

For MSRM WiFi extender setup using the WPS method, follow the steps listed below:

• Make sure your extender and router are in the same room before you begin installing an MSRM WiFi extender.
• Once the power LED light has stabilized, press your extender’s WPS button. After that, the LED light will start blinking.
• Within a few seconds of hitting the WPS button on the extender, hit the same WPS button on the router.
• If your device’s WPS button is disabled, log in and proceed to the wireless settings, where you can enable WPS.
• The WPS light on the extender and router should then blink for around 12 seconds each.
• Once the WPS setting is complete, the WPS repeater’s light will turn solid green.
• Finally, your network name will be displayed in the WiFi list as the name of the extension.
• Disconnect your extender and place it halfway between your router and the area where you want to connect to the internet.

Hopefully, by following the methods mentioned above, you will be able to successfully configure the MSRM WiFi extender. If you run into any problems throughout the MSRM setup procedure, please contact our knowledgeable support staff at our toll-free number for more assistance and guidance.

MSRM wifi extender modes

Three modes are available on the MSRM wifi extender:

Access point mode: All of your Wi-Fi devices that are directly connected to your Internet connection will now be able to connect to a wired network thanks to the access point mode.

Repeater Mode: In this mode, the signal strength and speed of your current WiFi network are increased. For individuals who already have a wireless router in use at their location, this mode is available.

Router Mode: In this mode, a secure wireless network is established. It enables sharing of the network by several devices. When you have a modem connection but no router, this mode will convert the extender into a router.

Common issues with  MSRM extender setup

While installing a MSRM extender can be a simple procedure, users may run into common setup problems. Typical problems and possible fixes are provided below:

• The extender is positioned too far from the main router, leading to weak signals.
• Incorrect WiFi network name (SSID) or password entered during setup.
• Electronic devices, walls, or metal objects obstruct the signal path.
• The extender firmware is not updated, causing compatibility issues.
• Incompatibility between the extender and your device.
• The extender is not compatible with the main router.
• Loose power connections or power outages affect the extender’s performance.
• The extender is not properly reset before setup, causing configuration conflicts.
• IP addresses conflict with other devices in the network.
• Too many devices are connected, overwhelming the extender’s capacity.

Troubleshooting steps for MSRM wifi extender issues

The method you use to troubleshoot your MSRM WiFi Extender setup will depend on the issue you’re facing. Still, you can follow these general troubleshooting guidelines:

• Ensure the extender is plugged in and powered on.
• Confirm it’s within the WiFi range of your router.
• Position the extender halfway between your router and the area with poor WiFi.
• If the initial setup fails, reset the extender to factory settings and start the setup process again.
• Connect your device to the MSRM extender’s network (SSID) during setup.
• Follow setup instructions precisely. Verify the username, password, and other configuration settings for accuracy.
• Check if there’s a firmware update for your extender. If available, update it for optimal performance.
• Ensure the extender is compatible with your router’s WiFi standards (e.g., 802.11ac).
• Avoid interference from other electronic devices. Microwaves, cordless phones, and Bluetooth devices can disrupt signals.
• To verify signal strength, use a WiFi analyzer app. To get the perfect signal, adjust the extender.
• A network that has too many devices on it may become slower. Unnecessary gadgets should be disconnected to enhance performance.
• To avoid problems during setup, temporarily disable any firewall or security software on your device.
• If everything else fails, get in touch with our customer service executives for more help.

You’ll be able to confidently set up, debug, and maintain your MSRM WiFi extender by following these instructions. Please contact our professional expert by email at (support@mywiffiextension.net) or by phone at (+1-323-471-3045) if you need special instructions or if you are having trouble setting up your MSRM Wi-Fi extender.

For more information:

• Victony wifi extender setup.
• Coredy wifi extender setup.
• Wavlink wifi extender setup.
• Wavlink AC600 setup
• PixLink WiFi Repeater Setup
• Macard WiFi Repeater Setup
• Trifiboost wifi extender setup
• Setek wifi extender setup
• Joowin wifi extender setup
• Generic wifi extender Setup

Frequently Asked Queries (FAQs)

You can finalize the Coredy wifi extender setup in two ways which are as follows:

• By manual method (Web browser setup).
• By wireless protected setup (WPS) method.

Coredy wifi extender setup By manual method

• Open your mobile device’s or computer’s wifi network manager and search by default for the extender name, i.e. ‘Coredy.’
• Select the name of the extender and input the network password.
• The password is printed on the extender’s back panel.
• Open the web browser on your device and enter the IP address 192.168.10.1 in the top address box.
• If necessary, log in to the admin page by using ‘admin’ as both the login and password (both are the same).
• Select the repeater option in the setup wizard.
• Select the network to be extended by clicking the select button. Refresh the network list if it is not properly loaded.
• In the room, enter the existing network password or pin.
• Wait a few minutes before restarting the extender after clicking Apply.
• Locate and connect to the extended network. (You must use the same password that you used to connect to the extension.)
• By default, the new name of the extended wifi network is ‘Coredy Ext.’
• The WLAN LED will continue to flicker if the connection to the new wifi network is not made, and the name of the new network will not be updated.
• Unplug the extender and place it approximately halfway between your home’s weak or dead zones and the router.
• Make sure that all three WLAN LED lights are amber at the same time (this indicates an appropriate position for the extender region).

Tip: In a higher zone, position the extender so that it is not blocked by walls, ceilings, or windows.

Coredy E300 setup

By WPS Method:

Wireless protected setup(WPS) is the easiest and simplest way to configure your Coredy E300 extender. You can complete the Coredy wifi extender setup by WPS method within two minutes by pressing a small button only. There is no need to grab any wifi enabled smart device.

• Turn on your Coredy wifi extender.
• Once it is powered on, find the WPS button on it.
• Press the WPS button on your coredy E300.
• After a few seconds press the same WPS button on your existing home router.
• If you get the three solid lights on your Coredy that means the connection between your coredy wifi extender and your home router has been established.
• Now you can move your coredy to a new location where you want to extend the wifi.

In this way you can complete the Coredy E300 setup process within just two minutes. If you face any trouble with it then call our technical team for free assistance. They will help you to setup your Coredy wifi extender.

How to setup Coredy E300 as an access point?

• Turn on the access point by pressing the On/Off button. Modify the access point mode.
• The mode switch is located on the side of the extender/repeater.
• Connect an access point to an electrical switch.
• Connecting the access point to the wired port with the ethernet cable that came with the access point/extender.
• Open the wifi management on your computer or device and look for the Coredy access point network name.
• Select the connection option and input the username, password, or PIN number on the AP label’s back panel. (If necessary)
• In the address bar of your device or computer’s web browser, type http://ap.setup admin or 192.168.10.1
• Enter the login and password on the open page. (The admin serves as both the username and the password.)
• Select the access point option in the Mode Wizard.
• Select mixed WPA2 / WPA security and input the security password or pin in the key area.
• Click Apply and wait a minute for the access point to reset.
• Find and join your computer or device’s new wifi network.
• Please keep in mind that the access point creates a new extended wifi network called ‘Coredy,’ which uses the same wifi network password as the device.

Also Read

• Wavlink AC600 setup
• PixLink WiFi Repeater Setup
• Macard WiFi Repeater Setup
• Trifiboost wifi extender setup
• Setek wifi extender setup
• Joowin wifi extender setup
• Generic wifi extender Setup

In case you are facing any trouble with Coredy wifi extender setup, Just dial our toll free number to get in touch with our technical experts for free assistance. They will help you resolve any problem within a couple of minutes.

Frequently Asked Queries (FAQs)

Wifi.wavlink.com | Wavlink wifi extender setup

Follow the steps below for Wavlink wifi extender setup through wifi.wavlink.com:

• Turn on your Wavlink extender after unboxing it.
• Place the extender close to the main router.
• Wait for your booster’s power light to illuminate.
• Use any smart device.
• Open the settings menu on your WIFI device and select the WIFI option.
• Establish a connection to the Wavlink EXT.
• Navigate to WiFi.wavlink.com.
• The extender setup page is now visible on your screen.
• To configure your Wavlink extender, follow the on-screen instructions.

In this manner you can finalize the Wavlink extender setup using wifi.wavlink.com.

Note: If the wifi.Wavlink web address is not accessible then use 192.168.10.1 default ip address.

How to login to my Wavlink WiFi extender?

Follow the steps outlined below for Wavlink wifi extender:

• Get your gadget ready.
• Enter wifi.wavlink.com in the address bar and press enter.
• The standard Wavlink extender login page displays on the screen.
• Then enter your login and the password you created during the setup procedure.
• Then press the login button.
• You may now view all of your Wavlink range extender configuration settings.

Wavlink repeater reset via wifi.wavlink.com

To reset your Wavlink repeater, go to wifi.wavlink. This local address allows you to reset your extender in under two minutes.

To reset your repeater follow these steps:

• First, connect the repeater.
• Join the Wavlink N Network.
• Now navigate to wifi.wavlink
• Enter Administrator and then Click Login.
• You should now be able to access the Wavlink management page.
• Go to the Settings or Advanced menu.
• The reset option can be found here.

You may occasionally be unable to access a device such as a phone, tablet, or computer. In that scenario, you can choose the Hard reset option to reset the Wavlink wifi extender. Which takes less time and is fairly simple.

How can I reset the Wavlink wifi repeater?

Hard reset procedure:

A hard reset will return your device to its factory default settings. You can reset your wavlink wifi extender settings if you forget your password.

• Connect your booster.
• With a solid pin, press the reset button.
• Hold it for around 8 to 10 seconds.
• Then wait for your Wavlink repeater to restart.
• When it’s finished, all of the lights will be solid green.
• Some light will automatically close in a few seconds.
• That indicates that your device has been successfully reset.

If you have any questions about your Wavlink booster, please contact our professionals who will help you.

Also read

• Wavlink AC600 setup
• PixLink WiFi Repeater Setup
• Macard WiFi Repeater Setup
• Trifiboost wifi extender setup
• Setek wifi extender setup
• Joowin wifi extender setup
• Generic wifi extender Setup

Frequently Asked Queries (FAQs)

How do I configure my Wavlink AC750?

Here’s how to do Wavlink AC750 setup:

• Take your AC750 WiFi repeater out of the box.
• Connect your aerial Wavlink repeater.
• Take out any of your smart devices.
• Connect your device to the extender’s network.
• Choose any browser.
• In addition, enter 192.168.10.1 or wifi.wavlink.com.
• You have arrived at the wireless repeater setup page.
• Install your booster to your existing wireless network by following the onscreen instructions.

If you are stuck or puzzled throughout the Wavlink AC750 setup process, don’t worry; simply call our educated and skilled technicians, and they will assist you in resolving your issue.

Wavlink AC750 setup using WPS method.

The WPS button is the quickest way to connect your Wavlink AC750 extender to your main network or router. You do not need to provide any details during the installation procedure, such as your existing wifi password or security key, because the wireless booster uses the same security key and settings as your existing network. Let’s go over how to set up your Wavlink aerial AC750.

Here are the instructions for configuring the Wavlink AC750 with WPS button:

• To begin, position your extender near the router.
• Switch on your Wavlink AC750.
• Wait until the LED light turns solid green.
• Then, on your extender, press the WPS button, followed by the router/modem.
• A green light will now begin to blink.
• Wait a few seconds until all of the LED lights on your extender turn solid.

Finally, your Wavlink wifi extender setup is complete. If you have a problem with your extender, please contact us by chat or by dialing our toll free number. Our technical experts will assist you in configuring your Wavlink extender.

How can I upgrade the firmware on my Wavlink AC750 extender?

If your Wavlink AC750 begins to buffer or provides sluggish internet service. If so, simply upgrade the firmware on your extender. Wavlink typically provides new firmware upgrades to improve device performance and introduce new features. To upgrade the newest firmware on your Wavlink AC750 WiFi extender, follow the steps below.

The following are the instructions for updating your Wavlink aerial AC750 firmware:

• Launch any web browser.
• Navigate to the URL wifi.wavlink.com.
• Enter your standard password.
• Click the login button.
• Then, upload the most recent Wavlink AC750 firmware.
• It will take a few minutes so wait for some time to complete the procedure properly.

If the methods provided do not function properly, please contact our technical experts. They are delighted to assist you with any problem.

How do I reset my Wavlink AC750 extender?

When your Wavlink AC750 extender isn’t operating properly or you have forgotten the password for your extender and want to recover it, a simple reset step might help you activate it again. 

You must carefully follow the steps outlined below:

• First, take out any smart gadget.
• Look for the reset button on the right side of the AC750.
• To reset your Wavlink wifi extender, press and hold the reset button.
• Insert a pointed pin into the reset button.
• Keep it there for 8-10 seconds.
• Check to see if the LED status of your aerial AC750 is flashing.

That’s how you can reset your Wavlink AC750 extender.

Also visit

• PixLink WiFi Repeater Setup
• MSRM WiFi extender setup
• Wavlink AC600 setup
• generic wifi extender extender

Wavlink AC750 troubleshooting procedures

• Make sure your Wavlink extender is close to your router.
• Connect your AC750 to a power source.
• To view the page, you must have a laptop, desktop, or phone.
• wifi.wavlink.com is a sub domain, Enter it in the address bar not in the google search bar.
• Install the most recent Wavlink WL-WN575A2 firmware.
• To access the address, you must be connected to the repeater.
• Check that your extender’s power light is solid.

FAQ

Rockspace extender setup

You can setup your extender in two ways:

• Rockspace wifi extender with Manual method.Using
• Using WPS (Wireless Protected Setup) button.

Rockspace wifi extender setup by Manual method

To manually setup your rockspace repeater, follow the instructions below:

• Unbox and arrange your rockspace repeater.
• Connect your Rockspace wifi extender.
• Go to your computer or laptop.
• Check that your rockspace extender is close to the router.
• Link your gadget to the internet.
• Choose any web browser, such as Firefox or Chrome.
• Then make a rockspace account.
• Then, as shown on the screen, proceed.

If you get stuck throughout the setup process. You may also use the WPS method to configure your rockspace extender. This blog will go over the WPS method for configuring your Rockspace repeater.

Rockspace extender setup using WPS button 

Wps (wireless protected setup) is a quick and easy way to set up your rockspace extension. WPS is a router feature that makes it easier to join wifi-enabled devices to a secure wireless network.

To set up your rockspace extender via the WPS button follow these steps:

• Connect your rockspace extender to a power outlet.
• Wait for your extender’s power light to turn solid.
• Then, on your rockspace extender, press the WPS button for the first time.
• Within 1-2 minutes, repeat the process on your router.
• Both devices’ extender LEDs begin to blink.
• While the configuration is taking place, do not turn off your WIFI extender.
• Wait a few seconds for your rockspace extender to connect to your home network.

This is how to use the WPS method to configure your rockspace extender. If you have any problems with your rockspace extender after the setup process. You can upgrade or reset your rockspace repeater; to learn how to update the firmware on your extender, continue reading below.

How can I upgrade the firmware on my Rockspace extender using re.rockspace.com?

Initially, firmware upgrades are meant to improve the performance of your extender. If you are experiencing buffering and are not supplying adequate internet speed. If so, simply proceed to firmware upgrading. To upgrade your Rockspace firmware, follow the instructions below to download the most recent firmware for your extension.

The following are simple ways to upgrade your Rockspace extender:

• Join to the extender.
• Launch the browser.
• Visit re.rockspace.local.
• Enter your username and password to log in.
• Select Firmware update from the menu.
• Navigate to the administration bar and select the most recent firmware.
• The firmware upgrade will take about 2-3 minutes.
• Make sure you don’t turn off the power during the upgrading.
• Your Rockspace extender will then restart.

If you have any problems while changing the firmware on your Rockspace, you can easily contact our professionals by live chat or phone. They will assist you in finding better options.

How do you reset the Rockspace extender?

If you have forgotten your username and password, or if your repeater is not providing adequate internet access. Then, with a sharp pin, paper clip, or needle, reset your Rockspace extender.

To reset your Rockspace extender follow the tips given below:

• Plug the extender into an outlet to turn it on.
• Following that, you will notice a solid blue light on your extender.
• Insert a pin through the reset hole.
• Maintain the pin in place for at least 8-10 seconds.
• Remove the pin from the reset hole.
• And then wait for the LED to solid Blue
• Your rockspace extender will then reboot automatically.

The rockspace extender has been reset to its factory preset settings. If you still need assistance with your rockspace extender, please contact our technical support staff.

How can I access re.rockspace.local?

The login procedure is quite simple. Here are the instructions for logging onto re.rockspace.local:

• Open a browser on your PC or mobile device.
• Enter re.rockspace.local or 192.168.0.254 in the address bar.
• When you press enter, the login page will appear on your screen.
• Fill in your login information with username and admin.
• You may now access all of the re.rockspace.local interface’s settings and functionalities.

This is the most secure way to access re.rockspace.local. If you have any questions about your Rockspace wifi extender, you may easily contact our technical experts. They will assist you with your inquiry.

For more information:

• Victony wifi extender setup
• Wavlink AC1200 setup
• Wavlink AC600 setup
• 192.168.10.1
• Wavlink wifi extender setup

FAQ

Here are the instructions for configuring the Wavlink AC1200:

• Turn on your wavlink AC1200 after unpacking it.
• Wait for the power LED to turn solid green after pressing the power button.
• Remember to keep the booster close to the router.
• Connect using Ap extender setup ext.
• Launch any web browser and type Ap.setup or 192.168.10.1, then press the enter key.
• To log in, enter your personal information.
• Follow the steps to complete the installation.
• You can now unhook your repeater and relocate it to your new location.

That’s how you manually complete the wavlink AC1200 setup procedure. If you have any problems with the manual setup, let’s try the (WPS) setup.

Wavlink AC1200 configuration through WPS

Let’s have a look at another approach for establishing your Wavlink repeater, the WPS method, which is said to be the quickest and easiest. After completing the Wavlink AC1200 setup through WPS, you will be able to set up your extender in less than two minutes without providing a username, password, or SSID. Let us now examine how the WPS technique works.

Here are the instructions for configuring the Wavlink AC1200 through WPS:

• Start your Wavlink AC1200.
• Make certain that it is close to the home router.
• On your booster, press the WPS button.
• Now, on your home router, push the same WPS button.
• When it displays three steady green lights, it implies you have successfully configured your repeater.
• You can unhook the repeater and place it wherever you choose.

That is how you complete the wavlink AC1200 setup through WPS.

How to update firmware on my Wavlink AC1200?

You will need to upgrade the firmware on your Wavlink AC1200 in order to remedy any issues you may face when using your extender (whether it is not providing the desired speed or something else). It has additional security features as well as other new features that will help you resolve your concerns.

Follow the steps below to upgrade the firmware on your Wavlink AC1200:

• Start your Wavlink AC1200.
• Consider any mobile device.
• Navigate to Ap.setup.
• Select settings and then firmware upgrade.
• Follow the steps to complete the firmware upgrade operation.
• It will take a minute, so don’t unplug the booster in the meantime.

This is how to update the firmware on your Wavlink AC1200.

 Also read

• PixLink WiFi Repeater Setup
• Macard WiFi Repeater Setup
• Trifiboost wifi extender setup

How to reset Wavlink AC1200?

If you have forgotten your admin password or login and wish to recover it, you must do a Wavlink AC1200 factory reset on your booster. When you reset the Wavlink AC1200, it prepares your extender for a new setup procedure by wiping all of your personal information, like passwords, usernames, and SSIDs. To finish the factory reset process, a hard pointed device, such as a paper clip or a needle, is necessary.

To reset the Wavlink AC1200, follow the procedures below:

• Connect your Wavlink AC1200 to a power outlet.
• Under a little hole, look for the factory reset button.
• It might be found on the repeater’s side panel.
• Push the reset button with a paperclip for 8-10 seconds.
• It will reboot automatically in a few seconds.
• Your extender is now prepared for the new installation procedure.

If you still require assistance with your Wavlink AC1200, please contact us via our toll-free hotline or live chat. We are always here to assist you  in any problem.

FAQ

To configure Wavlink extender via 192.168.10.1, do the following steps:

• Connect your Wavlink extender to a stable power source first.
• Later that, In the repeated mode, enable the extender.
• Turn on the wifi-enabled wireless device and join the designated extender network ap.setup login.
• The first connection then requires a password.
• Navigate to the browser and type in the IP address 192.168.10.1.
• On the device’s screen, you will be prompted to log in using your default account credentials as well as passwords.
• Then, carefully follow the procedures as directed to rapidly complete the ap.setup.

This is how you may set up a Wavlink range extender using the IP address 192.168.10.1. 

192.168.10.1 | Wavlink wifi extender Setup

• First, insert the Wavlink range extender into a power outlet. 
• It’s best to place it near your existing Wi-Fi router.
• Then, turn on your wifi-enabled device for ap.setup.
• Hold down the current WPS button on the extender for a few seconds.
• Repeat the third step on the current router while keeping an eye out for a connection between two devices.
• After the two devices have successfully communicated, detach the extender and place it in the dead zone.
• Enable the Wi-Fi settings in your wireless devices that you want to use to connect to the network.
• Select your Wi-Fi network and launch your browser.
• In the web address box, type http://ap.setup or the IP address 192.168.10.1.
• Sign in using 192.168.10.1 and the same username and password credentials you used for ap.setup.
• Select the Wizard Installation option.
• Enter your Wireless Network Password
• For Wavlink wifi extender setup, follow the on-screen instructions.

This is how you configure the Wavlink range extender, If you continue to have problems and need to contact us via our toll-free number.

Can’t connect to the IP address 192.168.10.1? What should I do?

If you are unable to connect to 192.168.10.1, Follow the tips given below:

• Connect your Wavlink range extender to a power source.
• When you have a power LED light, navigate to your laptop or cellphone’s wireless settings.
• Connect your device to the WIFI extender network.
• Launch a web browser and enter the IP address 192.168.10.1 into the address bar.
• You’ve arrived at the range extender’s login page.
• So, to connect your booster to your existing modem or router, follow the onscreen instructions.

If you still can’t connect your booster after following the procedures above, see the list below:

• If the repeater has two or more LED lights, please reset the booster to factory default.
• To correctly reset the device, press and hold the reset button for 10-15 seconds.
• If 192.168.10.1 does not work, use the web URL wifi.wavlink.com to view the installation page.
• If you are connected to the extender network, the default IP address will function. As a result, ensure that you are linked to the repeater network.
• Once you’ve installed your booster, you won’t be able to access the 192.168.10.1 IP address.

If you have any problem with your Wavlink wifi extender feel free to contact our professionals for free assistance.

Also read

• Wavlink AC600 setup
• PixLink WiFi Repeater Setup
• Macard WiFi Repeater Setup
• Trifiboost wifi extender setup

FAQ